NC vendor series
NC vendor series features
Touch panel-type Table vendor
It is the bending machine which this device is equipped with an NC function to the maximum as an opportunity for exclusive use of the bending, and was developed.
It is the machine which it is easy to treat with the many characteristics that a conventional air pressure, oil pressure type vendor does not have.
It is the machine which it is easy to treat with the many characteristics that a conventional air pressure, oil pressure type vendor does not have.
A compressor is unnecessary to be driven with an AC servo motor not air pressure, oil pressure drive. For NC control, rotary angle setting is easier than a conventional air pressure, oil pressure type. The bending angle setting of right and left that conventional oil pressure does not have is possible. The bending angle setting to up to approximately ten 100 kinds is possible, and an SD card can save program data. It is possible until rotary an angle of 0 degrees - 360 degrees X max100 turn (as for the NC mini-vendor approximately five 2 kinds). Shifting reshuffling is possible (as for the NC mini-vendor, possible to 25 rounds) for no stage of the bending speed. Exchange work of the rotary sleeve and core iron is speedy. It is displayed a production counter by a touch panel screen. Shifting reshuffling is possible for no stage of the bending speed. I bend it, and the axis can be operated by the jog dial. (option)
I attach an NC back gauge and am possible. (option)
External representation (38KB) |
Product specification (25KB) |
The picture of the moving part begins when I click it.
The picture of the moving part begins when I click it.
External representation (20KB) |
Product specification (27KB) |
The picture of the moving part begins when I click it.
I change , and the axis can work with the jog dial.
I attach NC back gauge and am possible.