3D-BENDER series
3D-BENDERseries The main characteristics
3D Wire Bender (Cut materials)
Materials supply method, can choose magazine supply(cut materials), one of the supply from coil materials.
Processing is possible in both end faces materials which have been processed.
2-jaw type, processing of the short work of both ends is possible.
The installation of the materials automatic supply device, Materials automatic exhaust system is possible.
2-jaw type, processing of the short work of both ends is possible.
The installation of the materials automatic supply device, Materials automatic exhaust system is possible.
3D-BENDER MB06-3DT
Can see the large picture of the cover when click the image.
 | outline drawing (162KB) |
| Specifications (14KB) |
Video of the moving part will begin when click.
3D-BENDER MB08-3DT
| outline drawing (343KB) (coil materials supply rotary correction machine type)
|
| Specifications (14KB) |
Video of the moving part will begin when click.
3D-BENDER MB12-3DT
| Specifications (14KB) |
Video of the moving part will begin when click.
3D-BENDERseries MB08-3DT-2H / MB12-3DT-2H The main characteristics
3D Wire Bender (Cut materials)
Materials supply method, can choose magazine supply(cut materials), one of the supply from coil materials.
Various bending tool constitution by the independent turn of the inner axis and the outside axis spindle.
Change of the draw bending method, and the compression bending method is possible.
The high repetition processing precision that high stiffness supports.
Change of the draw bending method, and the compression bending method is possible.
The high repetition processing precision that high stiffness supports.
3D-BENDER MB08-3DT-2H / MB12-3DT-2H
Can see the large picture of the cover when click the image.
Video of the moving part will begin when click.
Sample processing
